NEW!
Polyurethane Bushings
for Toyota and Lexus

Upgrade those old worn out, dry rotted rubber bushings to better the ride and handling of your vehicle. Saves you money too!  Our polyurethane are much cheaper (and better too) than the original stock bushings and will last a life time over the originals. They are resistant to oil and grease unlike original rubber. New bushings will eliminate the play and slop in your suspension thus improving the stability and handling of your ride.  All bushings are a trick looking dark purple color. For your stock original or racing applications. These will not degrade the ride of your street driven vehicle.

I have more Toyota bushings for all vehicles (including commercial, trucks and vans) years 1964 to 2006

They are just not listed cause there are so many.
I am adding new ones all the time so just ask.

Send me email to ask about polyurethane bushings available for your vehicle.

Send email to: rick@toyheadauto.com

My Payment options are listed at the bottom of this page or just click here

Avalon	MR2 and MR2 Spyder
Camry / Vienta	Paseo
Carina	Solara
Celica	Starlet
Celica /Supra	Supra, MA70, MA71, 3/86 – 12/1992 and JZA80 5/92 - On
Corolla / Sprinter	Tercel
Corona	Toyota Truck Tacoma, Hilux, Pick-up, Privia, Prado, Mini Van, Tarago, Estima, Lucida, Emina, Troop, Blizard,
Cressida	Lexus
Crown	VIENTA
	Scion XA, XB

My payment options are listed at the bottom of this page or just click here.

Avalon

2000 to 2005

Front Control Arm Lower – Rear Bushing Kit -1265K-(2 bushings, 2 tubes) standard alignment settings $70.80
Front Control Arm Lower – Rear Bushing Kit -2663K-(2 bushings, 2 tubes) standard alignment settings $33.60
Front Control Arm Lower – Rear Bushing Kit -1266K- (2 bushings, 2 tubes) PS increased DS decrease alignment settings $114.00
Front Control Arm Lower-Inner Rear Eccentric-SPF1267K- (2 Bushings, 2 Inner Tubes) Cast Arm, PS increased DS decrease alignment settings. $145.20
Front Control Arm Lower-Inner Rear Eccentric -SPF3174K-(6 Bushings, 2 Inner Tubes, 2 Outer Shells) Pressed Steel Arm, 1 x Standard & 1 x Offset bushing, replaces OE# 4865-06060.$207.60
Front Control Arm Lower-Inner Rear Eccentric -SPF3175K-(6 Bushings, 2 Inner Tubes, 2 Outer Shells) Pressed Steel Arm, Standard replacement OE# 4865-06060. $207.60
Front Control Arm Lower-Inner Rear Kit -SPF3173K- (6 Bushings, 2 Inner Tubes, 2 Outer Shells) Pressed Steel Arm, Standard replacement OE# 4865-06060 $207.60
Front Engine Steady Bushing -SPF1348K- (2 Bushings, 2 Inner Tubes) Large end has 50mm inside diameter $56.40
Front Engine Motor Mount / Dog Bone/ Steady / Bushing Kit -2706K- (2 bushings, 2 tubes $86.40
Front Steering Rack & Pinion Mount Bushing -SPF3197K- (3 Bushings, 1 Inner Tubes) Koyo Brand rack only. $72.00
Front Sway Bar Mount Bushing -SPF2880-_ _K - (2 Bushings) Measure bar diameter, 17mm available. $40.80
Rear Sway Bar Mount to Chassis Bushing -2284-_K- (2 bushings) Measure bar diameter 17mm available $30.00
Rear Trailing Arm Bushing Kit -0823K- (8 bushings, 4 tubes) $115.20

CAMRY
Chassis number # SV10, SV11, SV12, SV16, CV10, Vista 1982 – 1986

Front Control Arm Lower – Inner Bushing Kit -0510K-(4 bushings, 2 steel tubes). $47.30

Front Sway to Lower Control Arm Bushing kit -0222K -(4 bushings) 1982 to 6/1984 $41.80

Front Sway to Lower Control Arm Bushing kit -0237K (4 bushings, 2 steel tubes) 7/1984 to 4/1987 $67.10

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Outer Bushing Kit - 0825K-(8 bushings, 4 tubes) $73.70

Rear Sway Bar Link Lower Bushing Kit- 0903-4K- (4 bushings) $18.60

Rear Sway Bar Link Upper Bushing Kit - 0280K- (4 bushings, 2 tubes) $28.60

Rear Sway Bar Mount to Chassis Bushing kit -0199-__K -(2 bushings) Measure bar diameter 13,14,15,16,18,20 mm available $22.00

Rear Trailing Arm (a.k.a. Strut rod) Bushing Kit - 0823K-(8 bushings, 4 tubes) $101.20

CAMRY

Chassis number # SV20, 21, 22, 25, VCV21 Sedan and Wagon 1987 to 1991

Front Control Arm Lower – Inner Bushing Kit – 0511K- (4 bushings, 2 tubes) SV20, SV21, ZV21, 4 cyl and V6 vehicles $56.10

Front Sway Bar Mount to Chassis Bushing Kit – 0329-__K- (2 bushings) Measure sway bar diameter 24, 26, 27mm available. $47.30

Front Sway Bar to Lower Control Arm Bushing Kit –0321K- (4 bushings, 2 tubes) $61.60

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm – Front Rear Inner Bushing Kit – 1221K- (2 bushings, 2 tubes) Rear arms, rod type that run side to side.
Fits inner of the front - rear control arms. In other words the inner bushings mounted on the rod ends that are towards the center of the car.
Will not fit the rearward rear control arm (adjustable one). $45.10

Rear Control Arm – Front Rear Outer Bushing Kit – 1220K- (2 bushings, 2 tubes) Rear arms, rod type. fits outer of the front - rear control arms.
In other words the outer ends that are towards the rear wheels. Will not fit the rearward rear control arm (adjustable one). $42.90

Rear Control Arm, Front (non adjustable This is the forward control arm of the rear suspension, a.k.a. number 1 arm) OEM replacement $128.67

Rear Control Arm Complete Assembly (OEM Toyota) rearward adjustable arm, 6/ 1991 to 8/1993, SXV10, VCV10 State with or without ABS $139.44 each.
*Please Note: No bushings for the rearward adjustable rear control arms are available.
The outer ends of this arm are of a ball and socket type design (not a bushing) and are not serviceable.
You must replace the whole arm (complete assembly) as listed for sale above.

Rear Sway Bar, Mount to Chassis BushingKit – 0462K- (2 bushings) Measure bar diameter 14, 16 mm available $49.50

Rear Trailing Arm (Strut Rod) Bushing Kit – 0823K - (8 bushings, 4 tubes) these are the two rods on the car that run the length of the car in the rear. $101.20

CAMRY and VIENTA
Chassis number # SXV10, SDV10, VDV10, VCV10, Sedan and Wagon 1992 to 1996

Front Control Arm Lower Front Bushing Kit -2663-K (4 bushings) re-use original mounting pin $29.70

Front Control Arm Lower Rear Bushing Kit -1265K-(2 bushings, 2 tubes) $64.90

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Front Engine Mount / a.k.a. Steady / Dog Bone) Bushing Kit -1348K- (2 bushings, 2 tubes) Large end has 50 mm inside diameter. $51.70

Front Engine Mount (a.k.a. Engine Steady / Dog Bone) Bushing Kit -2706K- (2 bushings, 2 tubes) Large end has 65 mm inside diameter. $69.30

Front Steering Rack & Pinion Mount Bushing Kit -1191K- (3 bushings, 1 tube) for Power Steering $40.70

Front Sway Bar Mount to Chassis Bushing Kit - 1132-__K- (2 bushings) Measure bar diameter 17,18, 20, 23 mm available $24.20

Rear Control Arm - Front Rear Outer Bushing Kit (a.k.a. Lateral Control Rods).- 1105K- (8 bushings, 4 tubes) fits outer of the front - rear control arms.
In other words the outer ends that are towards the rear wheels. Will not fit the rearward rear control arm (adjustable one).
Yes the kit has some extra bushings. From feed back I got from customers it does only the outer ends. The outer are usually the ones that ware out.
It may to the inner ones too but so far I can not confirm this. $63.29

Rear Control Arm, Front (non adjustable This is the forward control arm of the rear suspension, a.k.a. number 1 arm) OEM replacement $137.02

Rear Control Arm Right Side Complete Assembly (rearward adjustable arm, a.k.a. number 2 arm ) OEM replacement for 1992 to 1996 $134.22*

Rear Control Arm Left Side Complete Assembly (rearward adjustable arm. a.k.a. number 2 arm) OEM replacement. 1992 to 1996 $147.45*

*Please Note: No bushings for the rearward adjustable rear control arms are available.
The outer ends of this arm are of a ball and socket type design (not a bushing) and are not serviceable.
You must replace the whole arm (complete assembly) as listed for sale above.

Rear Sway Bar Mount to Chassis Bushing -2297__K- (2 bushings) Replaces O.E.M. part # 48818-06051, Measure bar diameter, 15 & 16 mm available. $29.70

Rear Trailing Arm (a.k.a. Strut Rod) Bushing Kit -0823K- (8 bushings, 4 tubes) these are the two rods on the car that run the length of the car in the rear. $101.20

CAMRY, SOLARA and VIENTA

Chassis number # SXV20, MCV20 Series, Sedan and Wagon 1997 to 2001

Front Control Arm Lower - Front Bushing Kit -2663-K (4 bushings) re-use original mounting pin $29.70

Front Control Arm Lower - Rear Bushing Kit -1265K-(2 bushings, 2 tubes) $64.90

Front Motor Mount / Engine Steady / a.k.a. Dog Bone, Bushing Kit -1348K- (2 bushings, 2 tubes) Large end has 50 mm inside diameter. $51.70

Front Motor Mount / Engine Steady / a.k.a Dog Bone, Bushing Kit -2706K- (2 bushings, 2 tubes) Large end has 65 mm inside diameter. $69.30

Front Steering Rack & Pinion Mount Bushing Kit -1191K- (3 bushings, 1 tube) for Power Steering $40.70

Front Sway Bar Mount to Chassis Bushing Kit - 1132-__K- (2 bushings) Measure bar diameter 17,18, 20, 23 mm available $24.20

Rear Sway Bar Mount to Chassis Bushing Kit -2284-__K- (2 bushings) Measure bar diameter 16, 17 mm available $26.40

Rear Trailing Arm (a.k.a. Strut Rod) Bushing Kit -0823K- (8 bushings, 4 tubes) $101.20

CAMRY, SOLARA and VIENTA
2002 to 2006

Rear Trailing Arm (a.k.a. Strut Rod) Bushing Kit -0823K- (8 bushings, 4 tubes) $101.20

Front Steering Rack & Pinion Mount Bushing Kit -2857K- (3 bushings, 1 tube) for Power Steering. Re-use original strap and crush tube. $51.70

Celica and Carina 1970 to 1977

Chassis numbers: TA#, RA20, RA21, RA22, RA23, RA24, RA28, RA29

Front Lower Control Arm-Inner bushing kit, (2 bushings with collar tubes ) $44.40

Front Strut Bar to Chassis Mount bushing kit (a.k.a. radius rod. 4 bushings.), Celica coupe 71 to 75.
Fits chassis numbers (V.I.N#) RA20, RA21, RA22, RA25, TA22, TE27. $51.60

Front Strut Bar to Chassis Mount bushing kit (a.k.a. radius rod. 4 bushings.), Celica coupe and lift back 76 to 77.
Fits chassis numbers (V.I.N#) RA23, RA24, RA28, RA29, RA35, TA23, TA28, TA35. $48.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $22.80 package of 2

Front Idler Arm Bushing Kit, steering (2 bushings with 1 collar tube ) Celica 76-77 $26.62

Front Sway Bar End Links bushing kit (8 bushings) $25.20

Front Sway Bar (stabilizer) Upgraded End Link Kit, Complete Assembly. These bushing are made of a more durable Thermoplastic.
Better than OEM rubber! (comes with nut bolts, washer/retainers and rubber end link bushings). Set of two $55.00

Sway Bar Mount to Chassis bushing kit (2 bushings) $26.40

Rear Pan Hard Rod bushing kit (2 bushings with collar tubes) lateral rod attached from the rear axle housing to the chassis) $58.80

Rear Shocks Bushing Kit (for both rear shocks) 4 bushings for the bottom eyelet and also for the top mount of shock. $44.40

Rear Upper and Lower Control Arm bushing kit (8 bushings with collar tubes) bushing for both ends of your four rear trailing arms. $225.92

NEW!!! Complete Bushing Kits For 1971 To 1977 Celica. Click Here

Celica / Supra 78 to 1981

Chassis number # RA40, 42, 43, MA46, 47

Front Lower Control Arm-Inner bushing kit- 0509K- (2 bushings with collar tubes) $39.60

Front Idler Arm Bushing Kit -0910K-(2 bushings with 1 collar tube ) 29mm outside diameter . 20mm inside diameter $29.70

Front Strut Bar to Chassis Mount bushing kit-0307K- (4 bushings) $45.10

Front Sway Bar End Link bushing kit -2092BK-(8 bushings) $22.00

Front Sway Bar (stabilizer) Upgraded End Link Kit, Complete Assembly. These bushing are made of a more durable Thermoplastic.
Better than OEM rubber! (comes with nut bolts, washer/retainers and rubber end link bushings). Set of two $50.00

Front Sway Bar Mount to Chassis bushing kit-1285-_K- (2 bushings) $25.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Pan Hard Rod bushing kit (2 bushings with collar tubes) lateral rod attached from the rear axle housing to the chassis) $51.70

Rear Shocks bushing kit (for both rear shocks) 4 bushings for the bottom eyelet and also for the top mount of shock. $38.50

Rear Upper and Lower Control Arm bushing kit (8 bushings with collar tubes) (rear 4 link) bushing for both ends of your
rear trailing arms. $198.00

Celica / Supra 82 to 1985
Chassis number # RA60, 63, 64, 65, MA61

Front Lower Control Arm-Inner Bushing Kit -0509K- (2 bushings) $39.60

Strut Bar to Chassis Mount Bushing Kit-0307K- (2 bushings) $45.10

Sway Bar End Link Bushing Kit-0903K- (8 bushings) $25.30

Front Sway Bar (stabilizer) Upgraded End Link Kit, Complete Assembly. These bushing are made of a more durable Thermoplastic.
Better than OEM rubber! (comes with nut bolts, washer/retainers and rubber end link bushings). Set of two $50.00

Front Sway Bar Mount to Chassis Bushing Kit-1450-__K- (4 bushings) measure sway bar diameter. 12mm to 30mm available $22.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Inner Bushing Kit -1213K- (8 bushings, 4 collar tubes) for Celica GTS and Supra with independent rear suspension only (IRS) $105.60

Rear Shocks Bushing Kit (for both rear shocks) bushings for the bottom eyelet and also for the top mount of shock. $38.50

Rear Sway Bar link- Lower Bushing Kit-0280K- (4 bushings with 2 collar tubes) $28.60

Rear Sway Bar link- Upper Bushing Kit -0903-4K- (4 bushings) $17.60

Rear Upper and Lower Control Arm Bushing Kit -0018K-(8 bushings with collar tubes) For solid rear axle only (Not IRS) bushing for both ends of your rear trailing arms. $198.00

Pan Hard Rod Bushing Kit (2 bushings with collar tubes) For solid rear axle only (Not IRS) lateral rod attached from the rear axle housing to the chassis) $41.80

Celica 1986 to 1989
Chassis number # ST161, ST162, SX162, ST165 & GT4

Front Lower Control Arm Front Bushing -1044K- (2 bushings with collar tubes), Standard alignment settings. $57.20

Front Lower Control Arm Rear Bushing -1363K- (2 bushings with 2 collar tubes and 2 washers) PS & DS standard caster setting. $74.80

Front Lower Control Arm Rear Bushing -1364K- (2 bushings with 2 collar tubes and 2 washers) PS increased DS standard caster setting. $67.10

Front Lower Control Arm Rear Bushing -1365K- (2 bushings with 2 collar tubes and 2 washers) PS increase & DS decrease caster. $67.10

Front Lower Control Arm Rear Bushing -1365AK- (2 bushings with 2 collar tubes and 2 washers) PS & DS increase caster . $67.10

Front Sway Bar Mount to Chassis bushing kit -1335-__ K - (2 bushings) GT4, ST165, ST161, ST162,
Measure bar diameter 16, 25, 26 & 27 mm available. $24.20

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Outer Bushing -2372K- (4 bushings with collar tubes) ST161, ST162, front arm only. $48.40

Rear Control Arm Outer Bushing -1220K- (2 bushings with collar tubes) ST161, ST162, Does not fit GT4,
rear arms only, 35mm out side diameter, 14mm bolt. $42.90

Rear Control Arm Outer Bushing -2263K- (8 bushings with collar tubes) GT4, ST165. $125.40

Rear Control Arm Inner Front Bushing-2264K- (4 with collar tubes) GT4, ST165. $91.30

Rear Control Arm Inner Rear Bushing -2265K- (4 bushings with collar tubes) GT4, ST165. $88.00

Rear Sway Bar to Chassis Mount bushing kit -0331-__K- (2 bushings) GT4, ST165, ST161, ST162, Measure bar diameter 13, 19 mm available. $23.10

Rear Trailing Arms bushing kit, -0823K- (8 bushings, 4 tubes) ST161, ST162, $101.20

Celica 1990 to 1993
Chassis number # AT180, ST185, ST184 and GT4.

Front Control Arm Lower Front Bushing Kit -1435K-(4 bushings, 2 tubes). $78.10

Front Control Arm Lower Rear Bushing Kit -1320K-(4 bushings, 2 tubes, 2 washers). $70.40

Front Sway Bar Mount to ChassisBushing Kit -1335-__K-(2 bushings, Measure bar diameter 16 to 26 mm available). $24.20

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Outer Bushing Kit -2263K-(8 bushings, 4 tubes), GT4, ST185 all wheel drive. $125.40

Rear Control Arm Inner Rear Bushing Kit -2265K-(4 bushings, 2 tubes), GT4, ST185 all wheel drive. $88.00

-----------
Please Note: The 3 bushing kits below (2730K,1221K and 2731K) are for Celica front wheel drive (FWD) and will do all 8 ends of the rear control arms
(4 rods in the rear that go from the center out towards the wheel).

They are a real money saver because if you go to the Toyota dealer they do not sell the bushings alone.
They will tell you, you must replace the whole arm (complete assembly) which is well over $450.00 for all four arms!!!
These polyurethane bushings will last forever over the original rubber ones and perform better.

Rear Control Arm - Inner Front Bushing Kit -2730K- (2 bushing 2 tubes), ST180, ST184 FWD,
Does the 2 inner ends of the 2 forward rear control arms $73.70

Rear Control Arm - Inner Rear Arm Bushing Kit- 1221K -(2 bushing 2 tubes), ST180, ST184 FWD,
Does the 2 inner ends of the 2 rearward (adjustable) rear control arms $45.10

Rear Control Arm - Outer Bushing Kit -2731K- (8 bushings, 4 tubes), ST180, ST184 FWD Does all 4 outer ends of the rear control arms $94.60
------------

Rear Differential Support, Bracket Mount Bushing -2032K- GT4, ST185 all wheel drive ( supplement plug). $236.25 plus ship costs
Item above is a service. You have to send your old support bracket (steel work), then we fill and mold it with polyurethane.
service take about 7 to 13 weeks turnaround.

Rear Sway Bar Mount to ChassisBushing Kit -0462__K-( 2 bushings, Measure bar diameter 14 to 16 mm available). $25.30

Rear Control Arm Inner Front Bushing Kit -2264K-(4 bushings, 2 tubes), GT4, ST185 all wheel drive. $91.30

Rear Trailing ArmBushing Kit -0823K-(8 bushings, 4 tubes). Fits both FWD and all wheel drive. $101.20

Celica 3/94 to 11/99
Chassis number # ST204 & ST205

Front Control Arm Lower-Inner Rear Kit -SPF2742K- (6 Bushings, 2 Inner Tubes, 2 Outer Shells,
ST204 Only, with arm diameter of 60mm, Vertical pivoting bush, replaces OE number 48655-20200) $163.90

Control Arm Lower-Inner Rear Kit- SPF2275K-(6 Bushings, 2 Inner Tubes, 2 Outer Shells,
ST205 GT4 Only, with arm diameter of 50mm, Vertical pivoting bush, replaces OE #48655-20230) $

CELICA 11/99 – 2006
Chassis number # ZZT 231

Front Control Arm Lower -Inner Front Bushing Kit -0996K- (4 bushings, 2 tubes) $47.30

Front Control Arm Lower–Inner Rear Bushing Kit -2085K- (6 bushings, 2 tubes, 2 S) Standard setting $122.10

Front Control Arm Lower –Inner Rear Bushing Kit -2086K- (6 bushings, 2 tubes, 2 S) Single offset $122.10

Front Control Arm Lower –Inner Rear Bushing Kit -2087K-(6 bushings, 2 tubes, 2 S) double offset $122.10

Front Control Arm Lower –Inner Rear Bushing Kit -2088K-(6 bushings, 2 tubes, 2 S) double offset and anti-lift $121.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Corolla 1966 to 1970

Chassis numbers KE#, TE#

Front Idler Arm Bushing Kit -0686K- $31.90

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Spring Bushing Kit-All -0049K- (4 bushings) $49.50

Rear Spring Front Eye Bushing Kit -0048K- (8 bushings) $77.00

Corolla and Sprinter 1972 to 1975
Chassis number # KE20, 25, 26, TE2#

Front Lower Control Arm-Inner bushing kit,- 0509K- (2 bushings with collar tubes ) $39.60

Front Idler Arm Bushing Kit -1614K-(2 bushings with 1 collar tube) $23.87

Front Strut Bar Mount to Chassis bushing kit, - 0198K- (4 bushings) $50.60

Front Sway Bar End Link bushing kit -0903K-(8 bushings) $25.30

Front Sway Bar Mount to Chassis bushing kit, -1613__K- (2 bushings) measure bar diameter 16, 18 mm available $26.40

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Spring Front Eye Bushing Kit -0048K- (8 bushings) $77.00

Rear Spring Bushing Kit-All -0049K- (4 bushings) $49.50

Corolla 1974 to 1981
Chassis number # KE30, 35, 50, 55, TE3#, 51

Front Lower Control Arm-Inner bushing kit,-0509K- (2 bushings with collar tubes ) $39.60

Front Idler Arm Bushing Kit -0910K- 29mm outside diameter . 20mm inside diameter $29.70

Front Idler Arm Bushing Kit-1310K- KE30, 24, 1mm outside diameter & 17.5mm inside diameter $16.50

Front Strut Bar Mount to Chassis bushing kit-0699-19K- (4 bushings) $41.80

Front Sway Bar End Link bushing kit-0903K- (8 bushings) $25.30

Front Strut Bar Mount to Chassis bushing kit-1155-__K- (2 bushings) KE38 measure bar diameter mm 20mm to 32mm available.$30.80

Front Strut Bar Mount to Chassis bushing kit-2400-__K-(2 bushings) KE55 measure bar diameter mm 15mm and 18mm available. $30.80

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Spring Front Eye Bushing Kit-0891K- (4 bushings) 35mm outside diameter bushing $48.40

Rear Spring Front Eye Bushing Kit-1385K- (4 bushings) 50mm outside diameter bushing $79.20

Rear Spring Rear Eye Bushing Kit, All -0890K- (8 bushings) $44.00

Corolla and Sprinter 1979 to 1985
Chassis number # KE70, KE71, KE72, AE70, AE71, TA18, TE72

Front Lower Control Arm-Inner Bushing Kit -0509K- (2 bushings with collar tubes ) $39.60

Front Strut Bar Mount to Chassis Bushing Kit-1287K- (4 bushings), KE70 $19.00

Front Steering Rack & Pinion Mount Bushing Kit, Manual -0253K- (2 bushings) $35.20

Front Strut Bar Mount to Chassis Bushing Kit-0699-19K- (4 bushings) $41.80

Front Sway Bar End Link Bushing Kit-0903K- (8 bushings) $22.00

Front Strut Bar Mount to Chassis Bushing Kit-0605-__K- (4 bushings) $26.40

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Pan Hard Rod Bushing Kit (2 bushings) lateral rod attached from the rear axle housing to the chassis) $51.70

Rear Shocks Bushing Kit (for both rear shocks) bushings for the bottom eyelet and also for the top mount of shock. $38.50

Rear Leaf Spring Front Eye Bushing Kit -1065K- (4 bushings, 2 steel tubes) Station wagon $78.80

Rear Leaf Spring Rear Eye Bushing Kit -1066K- (4 bushings, 2 steel tubes) Station wagon $60.50

Rear Spring Shackle Upper Bushing Kit -1071K- (4 bushings) Station wagon $34.10

Rear Sway Bar link, Lower Bushing Kit-0280K- (4 bushings, 2 tubes) Sedan, replaces OEM# 90385-11021, $25.34

Rear Sway Bar link, Upper Bushing kit-0903-4K- (4 bushings) Sedan, replaces OEM# 48817-12010, $20.80

Rear Sway Bar Mount to Axle Bushing Kit -0873-__K (2 bushings) Sedan measure bar diameter 14, 17, 20, & 22 mm available $21.65

Rear Upper Control Arm Bushing Kit -0980K-$119.90

Rear Lower Control Arm Bushing Kit -0980K-$119.90

Corolla / Sprinter
Chassis number # AE86 1984 to 1987

Front Control Arm – Front Bushing Kit -0509K-(2 bushings, 2 tubes). $39.60

Steering Rack & Pinion Mount Bushing Kit -2988K- (2 Bushings). $38.50

Strut Bar to Chassis Mount Bushing Kit -0699-19K- (4 bushings). $41.80

Front Sway Bar Link Bushing Kit -2092BK-(8 bushings). $22.00

Front Sway Bar Mount to Chassis bushing kit-1450K__- (2 bushings) Measure bar diameter 12mm to 30mm available. $22.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Pan Hard Rod Bushing Kit -1827K-(also know as lateral rod, 2 bushings) 35 mm out side diameter, 30 mm wide bracket, 19.9 mm inner diameter, Cotton reel style bushing. $25.30

Pan Hard Rod to Chassis Mount -0427K-(body) bushing (1 bushing, 1 tube) 32 mm out side diameter, 26 mm wide bracket, 12 mm inner diameter, Cotton reel style bushing. $28.60

Pan Hard Rodto Rear Axle Housing -0963K-bushing (1 bushing, 1 tube) Tapered cotton reel style bushing. $23.10

Rear Sway Bar Link Lower Bushing -0280K-(4 bushings, 2 tubes). $28.60

Rear Sway Bar Link Upper Bushing -0903-4K-(4 bushings). $20.90

Rear Upper Control Arm Bushing Kit -0980K-$119.90

Rear Lower Control Arm Bushing Kit -0980K-$119.90

Corolla 1984 - 1988
Chassis number # AE80, AE82 Seca CS Sedan & Hatchback

Front Control Arm – Front Bushing -0326K-(2 bushings, 2 tubes). $42.90

Front Control Arm Lower – Rear Bushing -1360K-(2 bushings, 2 tubes, 2 washers) standard caster setting for street. $77.10

Front Control Arm Lower – Rear Bushing -1362AK-(2 bushings, 2 tubes, 2 washers) increased caster setting for race. $67.10
Greater caster angles serve to improve straight-line stability, they also cause an increase in steering effort

Front Sway Bar Link Bushing Kit -0903K-(8 bushings) $25.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm – Inner Bushing -1216K-(4 bushings, 4 tubes) $58.30

Rear Control Arm – Outer Bushing -0825K-(8 bushings, 4 tubes) $73.70

Rear Sway Bar Link Lower Bushing -0280K-(4 bushings, 2 tubes) $28.60

Rear Sway Bar Link Upper Bushing -0903-4K-(4 bushings) $20.90

Rear Sway Bar Mount To Chassis Bushing -0199-__K- (2 bushings) Measure bar diameter 13, 14, 15, 16, 18, 20mm available, $22.00

Rear Trailing Arm – Bushing Kit -0823K-(8 bushings, 4 tubes) $101.20

NEW!!! Bushing Kit Special. (for rear wheel drive only, GTS, SR5) Includes: Front Control Arm Bushings, Rear Control Arm Bushings, Front Sway Bar Bushings, Rear Sway Bar Bushings, Front Sway Bar End Links, Rear Sway Bar End Links, Front Strut Rod Bushings and Rear Track Arm Bushings
All This For Only $159.53

Corolla 6/89 – 7/1991
Chassis number # AE92, AE94, AE95 Sedan, Hatchback and Seca

Front Control Arm Lower– Front Bushing -0996K-(4 bushings, 2 tubes). $47.30

Front Control Arm Lower– Rear Bushing -0997K-(2 bushings, 2 tubes) standard caster setting $68.20

Front Control Arm Lower – Rear Bushing -1370AK-(2 bushings, 2 tubes) increased caster for race $69.30
Greater caster angles serve to improve straight-line stability, they also cause an increase in steering effort

Front Sway Bar Mount to ChassisBushing -0991-__K- (2 bushings) Measure bar diameter 23, 24 mm available $23.10

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Lower- Inner Bushing -1040K-(8 bushings, 4 tubes) AE92, AE93 only $96.40

Rear Control Arm Lower– Outer Bushing -0825K- (8 bushings, 4 tubes) AE94 only $73.70

Rear Control Arm Lower– Outer Bushing -1039K- (8 bushings, 4 tubes) AE92, AE93 only $101.20

Rear Sway Bar Mount to Chassis Bushing -0613-__K- (2 bushings) measure bar diameter 12mm to 25mm available $25.30

Rear Trailing Arm Bushing Kit -0823K-(8 bushings, 4 tubes) AE92, AE93 only $101.20

Corolla 9/1994 to 11/2001
Chassis number # AE101R, AE102X (Series 1)

Front Control Arm Lower– Front Bushing -0996K- (4 bushings, 2 tubes). $47.30

Front Control Arm Lower – Rear Bushing -1900K- (6 bushings,2 tubes,2 Sleeves) 8/1995 – 7/1999 $140.00

Front Control Arm Lower – Rear Bushing -2298K- (2 bushings,2 tubes,2 Sleeves)7/1994 to 7/1995 “NOT Vertical Type Pivoting Style” $61.60

Front Sway Bar Mount to Chassis Bushing -0832-__K- (2 bushings)Measure bar diameter 20,22 & 25mm available $25.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm – Bush Kit -1947K- (8 bushings,8 tubes) $144.10

Rear Sway Bar Mount to Chassis Bushing-0613-__K - (2 bushings)Bar dia 12,14,15,17,18,20,22,24,25 mm available $25.30

Rear Trailing Arm – Bushing Kit -0823K - (8 bushings,4 tubes) $101.20

Corolla 12/ 2001 to 5/2007
Chassis number # ZZE112R

Front Control Arm Lower– Front Bushing -0996K- (4 bushings, 2 tubes). $47.30

Front Control Arm Lower-Inner Rear Eccentric-3177K- (6 Bushings, 2 Inner Tubes, 2 Outer Shells) 1 x Standard bushing & 1 x offset bushing, replaces original part number 48655-12200 $236.50

Front Control Arm Lower-Inner Rear Eccentric-3178K- (6 Bushings, 2 Inner Tubes, 2 Outer Shells) 2 x Offset bushings, replaces original part number 48655-12200 $236.50

Front Control Arm Lower-Inner Rear Eccentric-3176K- (6 Bushings, 2 Inner Tubes, 2 Outer Shells) Standard replacement, replaces original part number 48655-12200 $236.50

Front Sway Bar Mount Bushing -3179-_ _K- (2 Bushings) Measure bar diameter, 22mm available $25.30

Corolla 9/1994 – 11/2001
Chassis number # AE101R, AE102X, AE112 (Series II)

Front Control Arm Lower - Inner Front Bushing-0996K - (4 bushings,2 tubes) $47.30

Front Control Arm Lower – Rear Bushing-1900K- (6 bushings,2 tubes,2 Sleeves) Standard $140.00

Front Control Arm Lower – Rear Bushing-1901K- (6 bushings,2 tubes,2 Sleeves) PS increase caster DS standard caster $140.00

Front Control Arm Lower – Rear Bushing-1902K- (6 bushings,2 tubes,2 Sleeves) PS&DS increase caster, don’t decrease right hand side it fouls chassis $140.00

Front Sway Bar Mount to Chassis bushing-0832-__K - (2 bushings) Measure bar diameter 20, 22 & 25mm available $25.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm – Bush Kit-1947K -(8 bushings,8 tubes) $115.50

Rear Sway Bar Mount to Chassis bushing-0613-__K - (2 bushings)Bar dia 12,14,15,17,18,20,22,24,25mm ava $19.00

Rear Trailing Arm – Bushing Kit-0823K- (8 bushings,4 tubes) $101.20

CORONA 1964-1974

Chassis number # RT40

Front Shock Absorber – Upper Bushing -2092K-(8 bushings). $25.30

Front Sway Bar End Link bushing kit -2092K- (8 bushings) $25.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Shock Absorber- Lower Bushing -2178-16K-(2 bushings) $18.70

Rear Shock Absorber- Upper Bushing -0094K-(4 bushings) $21.45

Rear Spring Front Eye Bushing -0891K-(4 bushings) $48.40

Rear Spring Rear Bushing All -0583BK-(8 bushings) $48.40

Cressida

Chassis number # MX32, MX62, 12/1976 - 7/1984

Front Control Arm Lower - Inner Bushing Kit -0509K- (2 Bushings, 2 Tubes) Use original shell $39.60

Front Idler Arm Bushing Kit -1476K-(2 Bushings, 1 Tube) $33.00

Front Strut Bar To Chassis Mount BushingKit -0152K- (4 Bushings) $49.50

Front Sway Bar Link Bushing Kit -0903K- (8 Bushings) $25.30

Front Sway Bar Mount To Chassis BushingKit -1285-_ _ K- (2 Bushings) Measure bar diameter 21 ,22,24mm available $25.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Panhard Rod To Chassis Mount Bushing Kit -0427K- (1 Bushings, 1 Tube) $28.60

Rear Panhard Rod To DifferentialMount BushingKit -0963K- (1 Bushings, 1 Tube) $18.70

Rear Shock Absorber - Lower BushingKit -2178-16K- (2 Bushings) $18.70

Rear Shock Absorber - Upper Bushing Kit -2755SK-(4 Bushings) $19.80

Rear Trailing Arm - Lower - Bushing AllKit -0827K- (8 Bushings, 4 Tubes) $130.90

Rear Trailing Arm - Upper - Bushing AllKit -0018K- (4 Bushings, 4 Tubes) $99.00

Cressida
Chassis number # MX63, GS61S, 1982-1985

Rear Control Arm Lower-Inner & Outer Kit -3180K-(8 Bushings, 4 Inner Tubes) Remove OE shell for fitment, 70mm long tubes inner & 65mm tubes outer $130.90

Cressida
Chassis number # MX73 Sedan, 10/1984 -1988

Front Control Arm Lower - Inner Bushing Kit -0509K- (2 Bushings, 2 Tubes) Use original shell $39.60

Front Sway Bar Link Bushing Kit -2755SK- (4 Bushings) $19.80

Front Sway Bar Mount To Chassis Bushing Kit -1319-__ K- (2 Bushings) Measure bar diameter 22,23 & 27mm available $22.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Panhard Rod To Chassis Mount Bushing Kit -0427K- (1 Bushing, 1 Tubes) $21.30

Rear Panhard Rod To Differential Mount Bushing Kit -0963K- (1 Bushing , 1 Tubes) $23.10

Rear Shock Absorber - Lower Bushing Kit -2178-16K- (2 Bushings) $18.70

Rear Sway Bar Link Bushing Kit -0903K- (8 Bushings) $25.30

Rear Sway Bar Mount To Chassis Bushing Kit -1446- __ K- (2 Bushings) Measure bar diameter 16,18mm available $16.50

Rear Trailing Arm - Lower - Bushing All- 0827K- (8 Bushings, 4 Tubes) Solid axle rear $105.60

Rear Trailing Arm - Upper - Bushing All -0826K- (8 Bushings, 4 Tubes) Solid axle rear $101.00

Cressida
Chassis number # MX83 Sedan 10/1988 - 1993

Front Strut Bar To Chassis Mount Kit-1324K- (4 Bushings, 2 Tubes) Re use original washers $75.90

Sway Bar Mount Bushing -1319-_ _K- (2 Bushings) Measure bar diameter 21,22,23,24,25,27 & 31.75mm available $27.50

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

CROWN

Chassis number # MS55, 65, 75, 85, 95, 111, 112, 9/1967 - 1983

Front Control Arm Lower-Inner Bushing Kit-1129K- (2 bushings, 2 tubes)9/1979 to 9/1983 $45.10

Front Control Arm Upper-Inner Bushing Kit- 1128K- (4 bushings, 4 tubes, 4 Sleeves)9/1979 to 9/1983 $135.30

Front Shock Absorber- Upper Bushing Kit-2755SK- (4 bushings) $19.80

Front Strut Bar To Chassis Mount Kit-0699-22K- (4 bushings) $41.80

Front Sway Bar Link Bushing Kit-2092BK- (8 bushings) $22.00

Front Sway Bar Mount To Chassis Bushing Kit-1131-__K - (2 bushings)Measure Bar diameter 18,20,23mm available $23.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Panhard To Chassis Mount Bushing Kit-1075K- (1 bushings, 1 tubes) $27.50

Rear Panhard To Diff Mount Bushing Kit-0963K- (1 bushings, 1 tubes) $23.10

Rear Shock Absorber- Lower Bushing Kit-2178-16K- (2 bushings) $18.70

Rear Shock Absorber- Upper Bushing Kit-2755SK - (4 bushings) $19.80

Rear Sway Bar Link Bushing Kit-0903K- (8 bushings) $25.30

Rear Sway Bar Mount To Chassis Bushing Kit-1132-__K - (2 bushings) Measure bare diameter 17, 18, 20, 23 mm available $24.20

Rear Trialing Arm - Bushing Kit -1127K- (12 bushings, 6 tubes) $179.30

CROWN

Chassis number # MS123 Royal Sedan 8/1983 - 5/1988

Front Sway Bar Link Bushing Kit -2092BK - (8 bushings) $22.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Shock Absorber- Lower Bushing -2178-16K - (2 bushings) $18.70

Rear Sway Bar Link Bushing Kit -0903K - (8 bushings) $25.30

Hilux 2WD Pick Up Truck

Chassis number # RN10,13,15,16,20, 22, 23, 25. 3/1968 – 2/1978

Front Idler Arm Bushing–1351K- (2 bushings) 32mm OD bush, 19mm ID (straight shackle style) $20.39

Front Shock Absorber-Upper Bushing-0094K- (4 bushings) $25.20

Front Sway Bar Link Bushing Kit-2092BK -(8 bushings) $22.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Shock Absorber – Upper / Lower Bushing-2178-16K- (2 bushings) $20.76

Rear Spring Bushing – All-2231K-(12 bushings) replaces OEM# 90385-18046 $64.05

Hilux 2WD Pick Up Truck
Chassis number # LN30, LN40 & RN30, RN40, 3/1978 – 7/1987

Front Shock Absorber – Upper Bushing Kit - 0094K - (4 bushings) $25.20

Front Strut Bar to Chassis Mount Bushing Kit - 0699-22K (4 bushings) $39.99

Front Sway Bar Link Bushing Kit - 2755SK - (4 bushings) 19.80

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Spring Front Eye Bushing - 0972K - (4 bushings,2 tubes) $49.35

Rear Spring Rear Bushing All - 2231-8K - (8 bushings) OE# 90385-18046 $45.15

Hilux 2WD Pick Up Truck
Chassis number # LN50, RN50, RN70, YN50 Series 8/1983 – 8/1988

Front Idler Arm Bushing-1351K - (2 bushings) Tapered 16mm ID, 23mm to 25.25mm taper (SX1145) $16.00

Front Strut Bar to Chassis Mount Bushing-0699-22K - (4 bushings) $39.99

Front Sway Bar Link Bushing Kit-2755SK - (4 bushings) $19.80

Front Sway Bar Mount to Chassis Bushing Kit-1285-_ _K - (2 bushings) Measure bar diameter 21, 22, 24mm available $24.15

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Spring Bushing Kit – All-2231K - (12 bushings) $63.00

MR2

Chassis number # AW11 2 Door Coupe 12/1984 – 12/1989

Front Control Arm Lower-Inner Bushing Kit –1330K- (2 bushings, 2 tubes) $42.00

Front Strut Bar to Chassis Mount Bushing Kit –1332K- (4 bushings, 2 tubes) $56.70

Front Sway Bar Link Bushing Kit – 2092BK- (8 bushings) $22.00

Front Sway Bar Mount to Chassis Bushing Kit -0660-__K- (2 bushings) Replaces OE# 48815-17010
Measure bar diameter 17, 18, 19, 20 & 23mm available. $26.25

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Lower – Inner Bushing Kit –1330K- (2 bushings, 2 tubes) $42.00

Rear Sway Bar Mount to Chassis Bushing Kit – 1333__K- (2 bushings) Replaces OE#48818-170550, 17060,
Measure bar diameter 10,12, 13, 14, 16 & 19mm available. $21.00

Rear Trailing Arm- Lower – Front Bushing Kit –0823-4K- (4 bushings, 2 tubes) $54.60

Rear Trailing Arm – Lower- Rear Bushing Kit – 1332K- (4 bushings, 2 tubes) $56.70

MR2
Chassis number # SW20 2 Door Coupe 12/1989 – 12/1999

Front Control Arm Lower-Inner Bushing – 1330K- (2 bushings, 2 tubes) 14” wheel rim model only. $42.00
Front Strut Bar to Chassis Mount Bushing – 0699-19K- (4 bushings) 14” wheel rim model only $39.99

Front Sway Bar Link Bushing Kit – 2092BK- (8 bushings). $22.00

Front Sway Bar Mount to Chassis Bushing -0660K- (2 bushings) 12/89 – 12/91 Replaces OE # 48815-17010, 17050, 17060 $26.25

Front Sway Bar Mount to Chassis Bushing 2377__K -(2 bushings) 12/9 – 8/99 17.5, 17.8, 20 mm, Replaces OEM # 48815 – 17100, 1712 $27.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Sway Bar Mount to Chassis Bushing – 0661K- (2 bushings) 12/89 – 12/91 Replaces OE#48818-17080, 17081 $23.25

Rear Sway Bar Mount to Chassis Bushing – 2378K- (2 bushings) 12/91 – 8/99 Replaces OE#48818-17110, 17111 $27.30

Rear Trailing Arm – Front Bushing – 0823-4K -(4 bushings, 2 tubes) $46.20

Rear Trailing Arm – Rear Bushing – 0699-19K- (4 bushings) $34.10

MR2 / Spyder
Chassis number # ZZW30 2 Door Coupe 10/2000 – 2004

Front Sway Bar Link to Lower Arm Bushing Kit – 2092B-4K (4 bushings) Must re-use all original washers $19.94

Front Sway Bar Mount to Chassis Bushing Kit –2399-_K -(2 bushings) Measure bar diameter 20 mm available, Replaces OEM #48818-17130 $22.06

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm - Inner Bushing Kit – 2396K- (4 bushings, 2 tubes) Replaces bushing in original arm OEM #48710-17050 $44.10

Rear Control Arm – Outer Bushing Kit – 2397K- (4 bushings, 2 tubes) Replaces bushing in original hub OEM #42304-17030 $

Rear Sway Bar Mount to Chassis Bushing Kit –2400-__K (2 bushings) Measure bar diameter 15, 18 mm, ava, Replaces OEM #48815-17150 $28.35

Rear Toe Control Arm- Inner Bushing Kit –2395K - (4 bushings, 2 tubes) Replaces OEM #48725-17100 $61.95
76.11
Rear Trailing Arm – Bushing Kit All –2398K - (8 bushings, 4 tubes) Replaces bushing in original arm OEM #48780-17050 $70.35

Paseo

Chassis number # EL44 / EL54 6/1991 – 07/1999

Front Control Arm Lower – Inner Front Bushing -1905K- (4 bushings,2 tubes)Must Measure, 31mm OD bushing $55.65

Front Control Arm Lower – Inner Front Bushing -1888K- (4 bushings,2 tubes) Must Measure, 34mm OD bushing $43.05

Front Control Arm Lower – Inner Rear Bushing -1906K- (2 bushings)”Don’t remove OE tube from arm”50mm long mount bracket $36.75

Front Control Arm Lower – Inner Rear Bushing -2635K- (2 bushings) ”Don’t remove OE tube from arm”335mm long mount bracket $40.95

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Paseo
Chassis number # RT104, RT118 8/1973 – 5/1979

Front Control Arm Lower – Inner Bushing-0867K - (4 bushings,4 tubes,4 Sleeves) $163.80

Front Idler Arm Bushing-0910K - (2 bushings,1 tubes) 29mm OD 20mm ID $29.70

Front Sway Bar Link Bushing Kit-2092BK - (8 bushings) $22.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Front Sway Bar Mount To Chassis Bushing-1285-__K - (2 bushings) Measure Bar diameter 21,22,24mm available $24.15

Rear Spring Front Eye Bushing-0911K - (4 bushings) Sedan only $66.15

Rear Spring Rear Eye Bushing-0913K - (4 bushings) Sedan only $35.70

Rear Spring Shackle Upper Bushing-1071K - (4 bushings) $32.55

Rear Spring Shackle Upper Bushing-0912K - (4 bushings) Sedan only $30.45

Paseo
Chassis number # XT130 1980 – 1983

Front Control Arm Lower – Inner Bushing-0509K - (2 bushings,2 tubes) Use original shell $39.60

Front Strut Bar To Chassis Mount Bushing-0699K - (4 bushings) $39.90

Front Sway Bar Link Bushing Kit -2092BK - (8 bushings) $22.00

Front Sway Bar Mount To Chassis Bushing -1233-__K - (2 bushings) $19.95

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Panhard Rod To Chassis Mount Bushing -0427K - (1 bushings,1 tubes) Sedan $27.30

Rear Panhard Rod To Differential Mount Bushing -0963K - (1 bushings,1 tubes) Sedan $23.10

Rear Shock Absorber – Lower Bushing -2178-16K - (2 bushings) $17.85

Rear Shock Absorber – Upper Bushing -2755SK - (4 bushings) $18.90

Rear Spring Front Eye Bushing -0911K - (4 bushings) Station wagon $66.15

Rear Spring Rear Eye Bushing -0913K - (4 bushings) Station wagon $35.70

Rear Spring Shackle Upper Bushing -0912K - (4 bushings) Station wagon $30.45

Rear Sway Bar Link Bushing Kit -2092BK- (8 bushings) Sedan $22.00

Rear Sway Bar Mount To Axle Bushing -1233-__K – (2 bushings) Sedan, measure bar diameter 18,20,23mm available $19.95

Rear Trailing Arm – Lower – Bushing All -0826K - (8 bushings,4 tubes) Sedan $118.65

Rear Trailing Arm – Upper – Bushing All -0826K - (8 bushings,4 tubes) Sedan $118.65

Paseo
Chassis number # ST141,RT142 Including Avante Sedan & Wagon 1983 – 11/1987

Front Control Arm Lower – Inner Bushing -0509K- (2 bushings,2 tubes) Use original shell $39.60

Front Strut Bar To Chassis Mount Bushing -0307K - (4 bushings) $44.28

Front Sway Bar Link Bushing Kit -0903K - (8 bushings) $24.15

Front Sway Bar Mount To Chassis Bushing -1450-__K - (2 bushings) Measure bar diameter 12mm to 30mm available $21.00

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Panhard Rod To Chassis Mount Bushing -0427K - (1 bushings,1 tubes) Sedan $27.30

Rear Panhard Rod To Differential Mount Bushing -0963K - (1 bushings,1 tubes) Sedan $23.10

Rear Shock Absorber – Lower Bushing -2178-16K - (2 bushings) $17.85

Rear Shock Absorber – Upper Bushing -2755SK - (4 bushings) $18.90

Rear Sway Bar Link Lower Bushing -0280K - (4 bushings,2 tubes) Solid axle rear $27.30

Rear Sway Bar Link Upper Bushing -0903-4K - (4 bushings) Solid axle $24.15

Rear Sway Bar Mount To Axle Bushing -0605-__K - (2 bushings) Solid axle $25.20

Rear Trailing Arm – Lower – Bushing All -0018K - (4 bushings,4 tubes) Solid axle $94.50

Rear Trailing Arm – Upper – Bushing All -0018K - (4 bushings,4 tubes) Solid axle $94.50

Starlet

Chassis number # EP82,EP85

3 & 5 Door hatchback 12/1989 – 1/1996

Front Control Arm Lower – Inner Front Bushing -1905K - (4 bushings,2 tubes)Must Measure, 31mm OD bushing $55.65

Front Control Arm Lower – Inner Front Bushing -1888K - (4 bushings,2 tubes) Must Measure, 34mm OD bushing $43.05

Front Control Arm Lower – Inner Rear Bushing -1906K - (2 bushings)”Don’t remove OE tube from arm”50mm long mount bracket $36.75

Front Control Arm Lower – Inner Rear Bushing -2635K - (2 bushings) ”Don’t remove OE tube from arm”335mm long mount bracket $40.95

Front Sway Bar Mount To Chassis Bushing -1487-__K - (2 bushings) measure bar diameter 16,19,20,22,27mm available $27.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Starlet
Chassis number # EP91, 3 & 5 Door Hatchback 3/1996 – 9/1999

Front Control Arm Lower – Inner Front Bushing -1905K - (4 bushings,2 tubes)Must Measure, 31mm OD bushing $55.65

Front Control Arm Lower – Inner Front Bushing -1888K - (4 bushings,2 tubes) Must Measure, 34mm OD bushing $43.05

Front Control Arm Lower – Inner Rear Bushing -1906K - (2 bushings)”Don’t remove OE tube from arm”50mm long mount bracket $36.75

Front Control Arm Lower – Inner Rear Bushing -2635K - (2 bushings) ”Don’t remove OE tube from arm”335mm long mount bracket $40.95

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

SUPRA

Chassis number # MA70, MA71, 3/86 – 12/1992

Front Sway Bar Mount To Chassis Bushing Kit - 2921-__K - (2 bushings) Measure bar diameter, 27mm and 30mm available $31.90

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Front Control Arm Lower – Inner Bushing Kit -1443K-(8 bushings, 4 tubes, 4 washers)
Bushings with molded washers fit to front eye $181.50

Front Control Arm Upper – Inner Bushing Kit -1576K- ( 4 bushings, 4 tubes, 4 washers) $101.20

Rear Upper Control Arm Bushing Kit -1576K- ( 4 bushings, 4 tubes, 4 washers) $101.20

These Control Arm Kits above for Supra are the best! You will notice the difference in a smooth but solid ride and handling. These will not degrade or make your street ride harsh. Not only that, they SAVE YOU LOTS OF MONEY! Because Toyota does not sell the bushings alone. You have to by the whole control arm and they are about $400.00 each new. Ouch!

Supra
Chassis number # JZA80 5/93 - 1998

Front Control Arm Lower – Front Bushing – 1403K- (4 bushings, 2 tubes) Early Model, up to 5/1996, bushing outside diameter = 49.5 mm $91.35

Front Control Arm Lower– Front Bushing – 1650K- (4 bushings, 2 tubes) Late Model, 5/1996 on, bushing outside diameter = 46 mm $63.00

Front Control Arm Lower– Rear Bushing – 1404K- (4 bushings, 2 tubes) Early Model, up to 5/1996, bushing outside diameter = 54.8 mm $101.85

Front Control Arm Lower – Rear Bushing – 1651K- (4 bushings, 2 tubes) Late model, 5/1996 on, bushing outside diameter = 51.1mm $78.75

Front Control Arm Upper – Inner Bushing –1352K- (4 bushings, 4 tubes) Measure housing 20 mm wide $118.65

Front Control Arm Upper – Inner Bushing – 1474K- (8 bushings, 4 tubes) Measure housing 38 mm wide $161.70

Front Steering Rack & Pinion Mount Bushing ( Power Steering) – 1193K-47K- (3 bushings, 2 tubes) Replaces OE# 45517-14040, suited to vehicles with steering rack housing outside diameter of 47mm $52.50

Front Steering Rack & Pinion Mount Bushing ( Power Steering) – 1193K-50K- (3 bushings, 2 tubes) Replaces OE# 45517-24030, suited to vehicles with steering rack housing outside diameter of 50mm $52.50

Front Sway Bar Mount To Chassis Bushing -0342_K- (2 bushings) Suits bracket height of 42mm, Measure bar diameter 24,25,26,27,28,29,30,32mm available $24.20

Front Sway Bar Mount To Chassis Bushing-1512 _K- (2 bushings) Suits bracket height of 44mm, Bar diameter 24, 27, 30mm available $37.40

Front Sway Bar Mount to Chassis Bushing – 1846K- (2 bushings) Measure bar diameter 24 mm to 32 mm available $32.55

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Control Arm Lower-Inner Bushing -3032K- (2 Bushings, 2 Inner Tubes) $122.10

Rear Control Arm Lower-Shock Mount Kit-3033K-(2 Bushings, 2 Inner Tubes) $93.50

Rear Cross-member Supplement Washers-2553K- (4Bushings) Front mount $37.40

Rear Cross-member Supplement Washers-2520K- (4 Bushings) Rear mount, to be fitted into original bushing $97.90

Rear Differential Pinion Mount Bushing- 2769K- (4 Bushings, 2 Washers) Upper is replacement bushing, lower is insert to original rubber bushing $74.80

Rear Sub Frame Rear Bushing-3269K-(4 Bushings, 2 Washers) Upper is replacement bushing, lower is insert to original rubber bushing $286.00

Rear Control Arm Upper - Inner Bushing Kit -1922K- (8 bushing, 4 tubes) remove steel outer shells $139.65

Tacoma Truck

Chassis number # RZN1##, VZN1##, 1/95 to 2006

Steering Rack & Pinion Mount (power steering) bushing kit. -1836K- 5 bushings, 2 steel tubes, 1 washer $57.75

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Toyota Van / Mini Van / Targo 11/82 - 9/1990

Chassis number # YR20, 21, 22, CR21 & YR31

Front Control Arm Lower – Inner Bushing Kit-1498K- (4 bushings, 4 tubes). $124.95

Front Strut Bar Mount to Chassis Mount Bushing Kit -0699-22K- (4 bushings). $28.45

Front Sway Bar End Link Bushing Kit -2092BK-(8 bushings). $22.00

Front Sway Bar Mount to Chassis Bushing Kit -0605K-__- (2 bushings) Measure bar diameter, 14 to 27 mm available. $25.20

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Pan Hard Rod Bushing kit ( Includes pan hard to chassis and pan hard to differential bushings), -1075K-&-0963K-(2 bushing, 2 tube). $48.30

Rear Shock Absorber – Lower Bushing-2178-16K- (2 bushings). $17.85

Rear Shock Absorber – Upper Bushing-2755SK- (4 bushings). $19.80

Rear Sway Bar Link Lower Bushing Kit -0306-4K- (4 bushings). $17.85

Rear Sway Bar Link Upper Bushing Kit -0280K- (4 bushings, 2 tubes). $24.31

Trailing Arm-Lower-Bushing All - 0827K- (8 bushings, 4 tubes). $124.95

Trailing Arm-Upper-Bushing All - 0826K- (8 bushings, 4 tubes). $118.65

Tercel 4x4

Chassis number # AL25 8/1983 – 4/1988

Front Control Arm Lower – Inner Bushing-1062K- (2 bushings, 2 tubes) $52.80

Front Sway Bar Mount to Chassis Bushing-0979-__K- (2 bushings) Measure bar diameter 21mm available $33.00

Front Sway Bar To Lower Control Arm Bushing-1064K- (4 bushings, 2 tubes) $52.80

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Rear Panhard Rod To Chassis Mount Bushing-0427K - (1 bushings, 1 tube) $28.60

Rear Panhard Rod To Diff Mount Bushing-0963K- (1 bushings,1 tube) $23.10

Rear Shock Absorber – Lower Bushing-2178-16K- (2 bushings) $17.85

Rear Shock Absorber – Upper Bushing-2755LK- (4 bushings) $18.90

Rear Sway Bar Link Lower Bushing-0280K- (4 bushings,2 tubes) $24.31

Rear Sway Bar Link Upper Bushing-0306-4K- (4 bushings) $18.70

Rear Sway Bar Mount to Axle Bushing-0873-_ _K- (2 bushings) Measure bar diameter 14, 17, 20, 22 mm available. $23.10

Rear Trailing Arm – Lower – Bushing All-0980K- (8 bushings,4 tubes) $119.90

Rear Trailing Arm – Upper – Bushing All-0980K- (8 bushings,4 tubes) $119.90

Tercel / Corsa
Chassis number # EL4#, NL4# 12/1989 – 1/1996

Front Control Arm Lower – Inner Front Bushing-1905K - (4 bushings,2 tubes)Must Measure, 31mm OD bushing $55.65

Front Control Arm Lower – Inner Front Bushing-1888K - (4 bushings,2 tubes) Must Measure, 34mm OD bushing $43.05

Front Control Arm Lower – Inner Rear Bushing-1906K - (2 bushings)”Don’t remove OE tube from arm”50mm long mount bracket $36.75

Front Control Arm Lower – Inner Rear Bushing-2635K - (2 bushings) ”Don’t remove OE tube from arm”335mm long mount bracket $40.95

Front Sway Bar Mount To Chassis Bushing-1487-__K - (2 bushings) measure bar diameter 16,19,20,22,27mm available $27.30

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Tercel / Corsa
Chassis number # EL5#, 3/1996 – 9/1999

Front Control Arm Lower – Inner Front Bushing-1905K - (4 bushings,2 tubes)Must Measure, 31mm OD bushing $55.65

Front Control Arm Lower – Inner Front Bushing-1888K - (4 bushings,2 tubes) Must Measure, 34mm OD bushing $43.05

Front Control Arm Lower – Inner Rear Bushing-1906K - (2 bushings)”Don’t remove OE tube from arm”50mm long mount bracket $36.75

Front Control Arm Lower – Inner Rear Bushing-2635K - (2 bushings) ”Don’t remove OE tube from arm”335mm long mount bracket $40.95

Front Tie Rod Grease Seal / Dust boot, Polyurethane will also fit tie rod, idler arm, and pitman arm.(see picture on tie rod). $19.80 package of 2

Lexus ES300 Sedan 4/1990 to 11/1994

Front Control Arm Lower Rear Bushing -1265K- $64.90

Front Control Arm Lower-Front Bushing -2663K- $29.70

Front Control Arm Lower-Inner Rear Eccentric Bushing Kit -1266K- $104.50

Front Control Arm Lower-Inner Rear Eccentric Bushing Kit -1267K- $133.10

Front Engine Steady Bushing Kit -1348K- $51.70

Front Engine Steady Bushing -2706K- $69.30

Front Steering Rack & Pinion Mount Bushing Kit. Power Steering -1191K- $40.70

Front Sway Bar Mount To Chassis Bushing -1132-_ _ K- $24.20

Rear Control Arm-Outer Bushing -1105K- (8 Bushings, 4 Inner Tubes) Fits outer of both front & rear arms $63.29

Rear Sway Bar Mount To Chassis Bushing -2297-_ _K- $29.70

Rear Trailing Arm - Bushing Kit-0823K- $101.20

Lexus GS300, 400, 430
1991 to 1996 Chassis number # JZS147

Front Control Arm Lower-Inner Bushing, (4 Bushings, 2 Inner Tubes) -3162K- $135.00

Front Control Arm Lower-Inner Eccentric Kit, Offset tube Camber adjust +/- (4 Bushings, 2 Inner Tubes) -3163K- $165.24

Front Control Arm Upper-Inner Kit (4 Bushings, 4 Inner Tubes) -3161K- $178.20

Front Strut Bar To Chassis Mount Kit (6 Bushings, 2 Inner Tubes, 2 Outer Shells) -3087K- $178.20

Front Strut Bar To Chassis Mount-Adjustable Bushing (6 Bushings, 2 Inner Tubes, 2 Outer Shells) -3088K- $178.20

Front Sway Bar Mount Bushing, measure sway bar diameter for correct size (2 Bushings) -3164-_ _K- $50.76

Rear Control Arm Lower-Inner Bushing (2 Bushings, 2 Inner Tubes) - 3032K - $119.88

Rear Control Arm Lower-Shock Mount Kit (2 Bushings, 2 Inner Tubes) -3033K- $91.80

Rear Control Arm Upper-Inner Kit (8 Bushings, 4 Inner Tubes) -1922K- $143.64

Rear Cross-Member Supplement Washers, Rear mount, to be fitted into original bushing (4 Bushings, 4 Washers) - 2520K - $96.12

Rear Differential Pinion, Mount Bushing, Upper is replacement bushing, lower is insert to original rubber bushing (4 Bushings, 2 Washers) -2769K- $73.44

Rear Sub Frame Rear Bushing (2 Bushings, 2 Inner Tubes, 2 Outer Shells, 4 Washers) -3269K- $273.00

Rear Sway Bar Mount Bushing, measure sway bar diameter for correct size
Replaces OE# 48818-30080 @ 24mm, measure bar diameter (2 Bushings) -3165-_ _K- $55.08

Rear Toe Control Arm - Inner Bushing, Outer end of arm is ball joint style bushing (2 Bushings, 2 Inner Tubes) -3017K- $73.44

Rear Trailing Arm - Front Bushing (2 Bushings, 2 Inner Tubes) -3016K- $73.44

Rear Trailing Arm - Rear Bushing, Bushing located in hub (4 Bushings, 2 Inner Tubes) -3031K- $98.28

Lexus IS200 Chassis # GXE10 Production dates 1/ 1999 to 2005

Front Control Arm Lower-Inner Bushing - 3039K- $93.50
Front Strut Bar To Chassis Mount Kit - 3040K- $218.90
Front Strut Bar To Chassis Mount-Adjustable Bushing - 3041K- $218.90
Front Strut Bar To Chassis Mount-Adjustable Bushing - 3042K- $218.90
Front Sway Bar Mount Bushing - 2816-_ _K- $34.10
Rear Control Arm Lower-Inner Bushing - 3036K- $162.80
Rear Control Arm Lower-Inner Eccentric Kit - 3037K - $200.20
Rear Control Arm Upper-Inner Eccentric Kit - 3044K - $275.00
Rear Control Arm Upper-Inner Kit - 3043K- $162.80
Rear Sway Bar Mount Bushing- 2817-_ _K- 31.90
Rear Toe Control Arm - Inner Bushing-2786K- $81.40
Rear Trailing Arm - Front Bushing - 2786K- $81.40
Rear Trailing Arm - Rear Bushing-2785K- $83.60

LS400 1989 to 1994 Chassis number # UCF10 / UCF11

This Is A New Listing In Progress For Inquiries Contact: rick@toyheadauto.com

Front Control Arm Lower-Inner Bushing -3090K- (4 Bushings, 2 Inner Tubes) $150.70

Front Control Arm Upper-Inner Kit, Measure housing, this kit suits 20mm wide (4 Bushings, 4 Inner Tubes) -1352K- $124.30

Front Steering Rack & Pinion Mount Bushing -3009K-(2 Bushings) $82.50

Front Strut Bar To Chassis Mount Kit -2989K-(2 Bushings, 2 Inner Tubes, 16 Washers, 2 Plates) $373.80

Front Sway Bar Mount Bushing -3011-_ _K- (2 Bushings, Measure bar diameter, 26.5mm available) $47.30

Rear Control Arm Lower-Inner Bushing -3014K- (2 Bushings, 2 Inner Tubes, 2 Outer Shells) $203.50

Rear Control Arm Lower-Outer Bushing -3015K- (4 Bushings, 2 Inner Tubes) Bushing located in hub. $79.20

Rear Control Arm Upper-Inner Eccentric Kit -3013K- (4 Bushings, 4 Inner Tubes, 4 Outer Shells) Camber adjustment +/- both sides, gives aproximatley 3/4 degree change $368.55

Rear Control Arm Upper-Inner Kit -3012K- (4 Bushings, 4 Inner Tubes, 4 Outer Shells) Standard replacement. $325.50

Rear Differential Pinion Mount Bushing, Upper is replacement bushing, lower is insert to original rubber bushing (4 Bushings, 2 Washers)-2769K- $74.80

Front Sway Bar Mount To Chassis Bushing Kit, Suits bracket height of 49mm, Measure bar diameter 21,22,23,24,27,28,30,32mm available (2 Bushings) -1846-_ _K- $34.10

Rear Toe Control Arm - Inner Bushing, Outer end of arm is ball joint style bushing (2 Bushings, 2 Inner Tubes) -3017K- $73.44

Rear Trailing Arm - Front Bushing (2 Bushings, 2 Inner Tubes) -3016K- $73.44

Rear Trailing Arm - Rear Bushing -2249K-    $49.50

Lexus SC300, SC400, 1990-2000 Chassis number # JZZ31, UZZ30.

Front Control Arm Lower Rear Bushing Kit, Early model, Bush OD = 54.8mm (4 Bushings, 2 Inner Tubes) -1404K- $106.70

Front Control Arm Lower Rear Bushing Kit, Late model, bush OD = 51.1mm (4 Bushings, 2 Inner Tubes) -1651K-    $82.50

Front Control Arm Lower-Front Bushing Kit, Early model, Bush OD = 49.5mm (4 Bushings, 2 Inner Tubes) -1403K- $95.70

Front Control Arm Lower-Front Bushing Kit, Late model, bush OD = 46mm (4 Bushings, 2 Inner Tubes) -1650K- $66.00

Front Control Arm Upper-Inner Kit, Measure housing, this kit suits 20mm wide (4 Bushings, 4 Inner Tubes) -1352K- $124.30

Front Control Arm Upper-Inner Kit, Measure housing, this kit suits 38mm wide (8 Bushings, 4 Inner Tubes) -1474K- $169.40

Front Steering Rack & Pinion Mount Bushing Kit Replaces OEM # 45517-24030, suited to vehicles with steering rack housing outside diameter of 50mm (3 Bushings, 2 Inner Tubes) -1193-50K- $55.00

Front Steering Rack & Pinion Mount Bushing Kit Replaces OEM # 45517-14040, suited to vehicles with steering rack housing outside diameter of 47mm (3 Bushings, 2 Inner Tubes) -1193-47K- $55.00

Front Sway Bar Mount To Chassis Bushing Kit, Suits bracket height of 42mm, Measure bar diameter 24,25,26,27,28,29,30,32mm available (2 Bushings) -0342-_ _K- $24.20

Front Sway Bar Mount To Chassis Bushing Kit, Suits bracket height of 49mm, Measure bar diameter 21,22,23,24,27,28,30,32mm available (2 Bushings) -1846-_ _K- $34.10

Rear Control Arm Upper-Inner Kit, Remove outer shells for fitment (8 Bushings, 4 Inner Tubes) -1922K- $146.30

Rear Cross-member Supplement Washers, Front mount (4 Bushings) -2553K- $37.40

Rear Cross-member Supplement Washers, Rear mount, to be fitted into original bushing (4 Bushings, 4 Washers)-2520K- $97.90

Rear Differential Pinion Mount Bushing, Upper is replacement bushing, lower is insert to original rubber bushing (4 Bushings, 2 Washers)-2769K- $74.80

Rear Sub Frame Rear Bushing, Replaces original bushing (2 Bushings, 2 Inner Tubes, 2 Outer Shells, 4 Washers)-3269K- $273.00

Rear Sway Bar Mount To Chassis Bushing Kit, Suits bracket height of 42mm, Measure bar diameter 24,25,26,27,28,29,30,32mm available (2 Bushings)-0342-_ _K- $24.20

Scion XA, XB 2004-2006

Front Engine Mount Left Void Filler -3215K- (1 Bushing) $
Front Engine Mount Rear Void Filler -3216K-(1 Bushing) $
Front Engine Mount Right Void Filler -3217K-(1 Bushing) $

I do business by email!

*Prices do not include shipping.

If you would like a price quote with shipping please send your zip code along with a list of item you are interested in buying.

Send Email to: rick@toyheadauto.com

----

My Payment Options:

I accept all major Credit Card payments through PAY PAL.com ONLY (owned by Ebay).
It is the #1 online payment service in the world. They are safe, secure and the
fastest way to get items paid for instantly and shipped to you.
Pay Pal now accepts many Currencies from around the world.

Paying is easy. I can send an invoice via email through Pay Pal, the email-invoice will take
you through the easy steps to pay instantly online with a few clicks. It does not cost anything to sign up.
See them at: https://www.paypal.com/

NEW !!! Through Pay Pal I can now receive payments in 23 currencies: Click here to see if Pay Pal is available in your country.

I SHIP WORLD WIDE !!!
Please contact me by email for any additional questions regarding other payment options

rick@toyheadauto.com

I accept Western Union Payments
Available In Many Countries, Click Here For More Info.

------------------------------------------------------------

Thank you for visiting Toyhead Auto Restoration Services!
Philadelphia, PA. USA

The best way to contact me is by email !!! Send Email to: rick@toyheadauto.com

Back to Toyhead Auto Home Page