Toyhead Auto Restoration Services

Toyota Specialist

Exhaust Headers & Gaskets


Gaskets

Copper Header Gasket for 20R, 22R & 22RE, 1971-1983 motor with round exhaust ports only.  Made from reusable .062 in. thick flat annealed copper.  These copper exhaust gaskets will conform to rough or damaged surfaces to provide a tight, leak proof seal. Can not be used on smog controlled vehicles.  $46.49

Header Gasket for 22RE motor with pear shaped exhaust ports. Super high temp material  $31.89

Copper Header Gasket for 5SFE engine. Fits Celica, MR2 and Camry 1990 to 1997 with 5SFE motor $33.45


Toyota Exhaust Headers


Header Kit "Chikara" for 20R, 21R, 22R Engines Toyota Celica, Corona and Truck 1975 to 1988 $229.96
Has no smog hook ups. 3/8th inch thick flange. Made from 1-1/2 inch diameter durable 18 gauge steel.
Comes with gasket. This is a shorter type header. You must fabricate a pipe from the header to your existing exhaust system.

Header Kit "Chikara Silver Ceramic Coated " for 20R, 21R, 22R Engines Toyota Celica, Corona and Truck 1975 to 1988 $553.47
Basically the same design as above item but Silver Ceramic Coated for anti-corrosion and longer life.


Header Kit "Shorty" for 20R, 21R, 22R Engines Toyota Celica, Corona and Truck 1975 to 1988
$252.09
Has smog hook up for air injection (smog), 4 into 1 design. 5/16th  inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel.
Comes with gaskets and hardware.

 

Header Kit for 20R, 21R, 22R Engines Toyota Celica (1975-81), Corona and Truck  1975 to 1983, $199.96

Has smog hook ups. 3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel. Comes with gasket and reducer.


Header Kit "Silver Ceramic Coated" for 20R, 21R, 22R Engines Toyota Celica, Corona and Truck 1975 to 1988 , $332.06
3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel. Comes with gasket and reducer.


Header Kit for 20R, 21R, 22R Engines Toyota Truck 1979 to 1983 2WD and 4WD,
$221.63
3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel. Comes with gasket and reducer.
Has smog hook ups. Comes with header extension to connect to stock system. Fabrication may be required.

Header Kit "Tri-Y Design" for 22R, 22RE, 22RE Engines Toyota Truck and 4Runner 1981 to 1988 $512.87
Has no smog hook ups. Tri-Y design, Silver ceramic coated 3/8th  inch thick flange. Made from 1-1/2 inch diameter durable 14 gauge steel.
Comes with gaskets and cylinder head studs. Fits manual transmissions only. For legality under C.A.R.B. regulations
the connector/y-pipe assembly must be used on vehicles originally equipped with catalytic converters.


Header
Kit "Tri-Y Design With O2 Sensor" for 22R, 22RE, 22RE Engines Toyota Truck and 4Runner 1981 to 1988 $535.00
Includes smog ports for air injection. Tri-Y design, Silver ceramic coated 3/8th  inch thick flange. Made from 1-1/2 inch diameter durable 14 gauge steel.
Comes with gaskets and cylinder head studs. Fits manual transmissions only. For legality under C.A.R.B. regulations
the connector/y-pipe assembly must be used on vehicles originally equipped with catalytic converters.


Header
Kit "Tri-Y Design with With Smog Ports and O2 Sensor" for 22R, 22RE, 22RE Engines Toyota Truck and 4Runner 1981 to 1988
$573.00
Includes smog ports for air injection and oxygen sensor bung. Tri-Y design, Silver ceramic coated 3/8th  inch thick flange.
Made from 1-1/2 inch diameter durable 14 gauge steel.


Header
Kit "Tri-Y Design" for 22R, 22RE, 22RE Engines Toyota Truck and 4Runner 1981 to 1988 $555.92
Tri-Y design, Silver ceramic coated 3/8th  inch thick flange. Made from 1-1/2 inch diameter durable 14 gauge steel.
Come with bolt studs for cylinder head and gaskets. Fits manual transmissions only.
For legality under C.A.R.B. regulations the connector/y-pipe assembly must be used on vehicles originally equipped with catalytic converters.


Header Kit for 22R, 22RE, 22REC Engines Toyota Truck and 4Runner 1984 to 1989 $249.96

4 into 1 design. 3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel.
Has hookups for smog and engine management sensors. Comes with header extension to connect to stock system. Fabrication may be require.
Fits automatic transmission only. Will not fit column shift.


Header Kit for 22R, 22RE, 22REC Engines Toyota Truck and 4Runner 1984 to 1989 $249.96
4 into 1 design. 3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel. Includes 2 bolt flange for O2 sensor.

Header Kit "Stainless Steel" for 22R, 22RE, 22REC Engines Toyota Truck and 4Runner 4WD 1985 to 1995 $492.70
Includes the intermediate tube. 50 state smog legal header. 4 into 1 design. 1/2 inch thick flange. Made from 1-1/2 inch diameter durable 1/16th steel.
Comes with cylinder head studs, gaskets, reducer, and hose clamps.


Header Kit "Stainless Steel" for 22R, 22RE, 22REC Engines Toyota Truck and 4Runner 4WD 1981 to 1987 $492.70
Includes the intermediate tube. 50 state smog legal header. 4 into 1 design. 1/2 inch thick flange. Made from 1-1/2 inch diameter durable 1/16th steel.
Comes with cylinder head studs, gaskets, reducer, and hose clamps.


Header Kit for
"Silver Ceramic Coated" 22RE Engines Toyota Truck 1990 to 1995 $368.96
4 into 1 design. 3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel.
Has hookups for smog and engine management sensors. Comes with header extension to connect to stock system. Fabrication may be require.


Header Kit for 2T, 2TB, 2TC, 3TC Engines Toyota Corolla 1975 to 1983 $192.25
4 into 1 design. 3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel.
Has no smog or engine management hookups. Comes with gasket and reducer.

Header Kit "Silver Ceramic Coated" For 2T, 2TB, 2TC, 3TC Engines Toyota Corolla 1975 to 1983 $313.61
Basically the same design as above item but Silver Ceramic Coated for anti-corrosion and longer life.


Header Kit
for 5MGE Engine, Toyota Celica Supra 82-85 $272.96  
3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel.
Has hookups for smog and engine management sensors.
Comes with header extension to connect to stock system, gasket and reducer.

Header Kit for 5MGE Engine, Toyota Celica Supra 82-85 $462.45
Basically the same design as above item but Silver Ceramic Coated for anti-corrosion and longer life.


Header Kit for 4AG, 4AGEC Engine,
Toyota Corolla GTS (AE86) 1985 to 1987 $184.47
4 to 2 to 1 design. Has hookups for smog and engine management sensors. 3/8th inch thick flange.
Made from 1-1/2 inch diameter durable 16 gauge steel. Comes with header extension to connect to stock system,
gasket and reducer. Fabrication may be required.


Header Kit for 4AFE Engine, Toyota Corolla 1988 to 1992 $233.67
3/8th inch thick flange. Made from 1-3/8th inch diameter durable 16 gauge steel.
Comes with header extension to connect to stock system, gasket and hardware.


Header Kit For 7MGE Toyota Supra 1986 to 1992 $294.96
3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel.
Includes hook-ups for smog and engine management sensors.
Comes with header extension to connect to stock system and gaskets.


Header Kit for 2RZ-FE Engine Toyota Tacoma 1995 to 2004 $212.46
3/8th inch thick flange. Made from 1-1/2 inch diameter durable 16 gauge steel. Flanged collector.
Comes with header extension to connect to stock system and gaskets.


Header Kit "Tri-Y Design" for 3RZ-FE Engine Toyota Tacoma 1995 to 2004 $468.01
Tri-Y design, Silver ceramic coated 3/8th  inch thick flange. Made from 1-1/2 inch diameter durable 14 gauge steel.
This header has 3.5 in. bolt pattern on convertor flange. Come with bolt studs for cylinder head, gaskets.
and header extension to connect to stock system and gaskets.



We do business by email!
*Prices do not include shipping. 
If you would like a price quote with shipping please send your zip code along with a list of item you are interested in buying.
Send Email to: rick@toyheadauto.com
----

Our Payment Options:

We accept all major Credit Card payments through PAY PAL.com ONLY.

It is the #1 online payment service in the world.  They are safe, secure and the
fastest way to get items paid for instantly and shipped to you.

Through Pay Pal we can receive payments in over 23 currencies:
Click here to see if Pay Pal is available in your country.

Paying is easy. We can send an invoice via email through Pay Pal, the email-invoice will take
you through the easy steps to pay instantly online with a few clicks. It does not cost anything to sign up.
See them at: https://www.paypal.com/



WE SHIP WORLD WIDE !!!

Please contact me by email for any additional questions regarding other payment options

rick@toyheadauto.com



We Accept Western Union Payments
Available In Many Countries, Click Here For More Info.


------------------------------------------------------------

Thank you for visiting Toyhead Auto Restoration Services!
USA
.

The best way to contact us is by email !!!  Send Email to: rick@toyheadauto.com
 



Back to Toyhead Auto Home Page